Order Products : sales@su-jiao.com
Braskem PE LHB-118/21AF
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mIuFbP_Braskem-PE-LHB-118-21AF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LHB118/21 AF is a LLDPE copolymer produced by Braskem. It is a ready-to-use product since it contains 10% LDPE. Its additive package was optimized to avoid blocking, even at low thickness. Film obtained from this grade show very good mechanical properties and a good balance between sealability and processability. Very low gel amount. Additive:
Applications: Frozen bags; general purpose. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 38 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Fracture | 40.0 | MPa | ASTM D882 |
| TD : Fracture | 30.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 1000 | % | ASTM D882 |
| TD : Fracture | 1300 | % | ASTM D882 |
| Flexural Modulus | ASTM D790 | ||
| 1% Secant, MD | 180 | MPa | ASTM D790 |
| 1% Secant, TD | 210 | MPa | ASTM D790 |
| Dart Drop Impact | 100 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 80 | g | ASTM D1922 |
| TD | 560 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (60°) | 98 | ASTM D2457 | |
| Haze | 12 | % | ASTM D1003 |
| Extrusion instructions |
|---|
| Blown FilmTemperature profile: 170 to 190°CBlow up ratio: 2 to 3:1Die gap: 1.8 to 2.5 mmScreen package: 40/60/40 blendScreen package: 40/40 100% pureMass temperature: 190 °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ad-Tech Urethanes UC-4521-1 | Ad-Tech Plastic Systems Corp. | TSU | Ad-Tech Urethanes |
| GPPC ABS D-470 | GPPC Chemical Co., Ltd. | ABS | GPPC ABS |
| KRALASTIC® MTH-2 | Nippon A&L Inc. | ABS | KRALASTIC® |
| KOPELEN JH-380 | Lotte Chemical Corporation | PP Impact Copolymer | KOPELEN |
| LNP™ FARADEX™ AS003 compound | SABIC Innovative Plastics | ABS | LNP™ FARADEX™ |
