Order Products : sales@su-jiao.com
RELENE® E19010
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mGQHY5_RELENE-E19010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| E19010 is a Linear Low Density Polyethylene (LLDPE) grade, for General Purpose Applications like Blending for Injection Moulding, Drip Lateral and Thick Extruded Products. This grade meets the requirements of material as per IS 12786:1989 on irrigation equipment - Polyethylene pipes for irrigation laterals - specification. When incorporated with adequate quantity of Carbon Black as specified in the clause 4.1 of IS 12786:1989, the pipe made from this grade will meet creep rupture stress requirement of PE-25 class of pipe. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.1 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | > 13.0 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, Injection Molded | 13 | % | |
| Break, Injection Molded | > 500 | % |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VESTAMID® HTplus M3035 | Evonik Industries AG | PPA | VESTAMID® HTplus |
| Bergamid™ NL-35GF/000 BLACK | PolyOne Corporation | Nylon 612 | Bergamid™ |
| Formolene® E602 | Formosa Plastics Corporation, U.S.A. | HDPE, HMW | Formolene® |
| Karina WHITE PVC COMPOUND 800-10/ 1-CY-RT | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| LNP™ STAT-LOY™ A30009 compound | SABIC Innovative Plastics | ABS | LNP™ STAT-LOY™ |
