Order Products : sales@su-jiao.com
Bergamid™ A70 G25 U-SO TM
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Bergamid™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mGA5iv_Bergamid-A70-G25-U-SO-TM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Bergamid™ A70 G25 U-SO TM is a Polyamide 66 (Nylon 66) product filled with 25% glass fiber. It is available in Europe. Characteristics include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1(23°C) | 1.40 | g/cm³ | DIN 53479 |
| Ash Content | > 25 | % | ISO 3451 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Maximum Use Temperature | IEC 60216 | ||
| -- 2 | 120 | °C | |
| Short Time | 220 | °C |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C, 4.00 mm, Injection Molded) | 8000 | MPa | ISO 527-2/1 |
| Tensile Stress (Break, 23°C, 4.00 mm, Injection Molded) | 125 | MPa | ISO 527-2/5 |
| Tensile Strain (Break, 23°C) | > 2.0 | % | ISO 527-2/5 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 7.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (-30°C) | 55 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 250 | °C | ISO 75-2/B |
| Melting Temperature (DSC) | 261 | °C | ISO 3146 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+13 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Comparative Tracking Index (Solution A) | > 400 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.800 to 3.00 mm, ALL) | V-0 | UL 94 | |
| Glow Wire Flammability Index (0.800 to 3.00 mm) | 960 | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature | IEC 60695-2-13 | ||
| 1.60 mm | 750 | °C | |
| 3.00 mm | 775 | °C |
| Note Message | |
|---|---|
| 1 . | ±0.03 g/cm³ |
| 2 . | Continuous (GTP 50% Tensile) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tislamid® PA6 PA6 15 MNF FR | Tisan | Nylon 6 | Tislamid® PA6 |
| Nycast SLX | Cast Nylons Ltd. | Nylon 6 | Nycast |
| Eltex® PF6220AE | INEOS Olefins & Polymers Europe | mLLDPE | Eltex® |
| GTPO™ 8290 | S&E Specialty Polymers, LLC | TPO (POE) | GTPO™ |
| IPC PP 4810C-T | International Polymers Corporation | PP Copolymer | IPC PP |
