Order Products : sales@su-jiao.com
Dynacom 401-G35
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Dynachem Co. Ltd. |
| Trademark: | Dynacom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mCgZi0_Dynacom-401-G35.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dynacom 401-G35 is a Polyamide 6 (Nylon 6) material. It is available in Asia Pacific. |
| General Information |
|---|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.40 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow 1 | 0.20 to 0.80 | -- | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 1.0 | -- | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 121 | -- | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength 2 | 176 | 108 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 5.0 | 5.0 | % | ASTM D638 |
| Flexural Modulus 4 | 8820 | 5290 | MPa | ASTM D790 |
| Flexural Strength 5 | 255 | 147 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm) | 130 | 200 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 210 | -- | °C | ASTM D648 |
| Vicat Softening Temperature | 225 | -- | °C | ASTM D1525 6 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength (1.00 mm) | 19 | 15 | kV/mm | ASTM D149 |
| Arc Resistance | 105 | 120 | sec | ASTM D495 |
| Additional Information | Dry | Conditioned | Unit | |
|---|---|---|---|---|
| Conditioned Moisture Content | -- | 2.5 | % |
| Note Message | |
|---|---|
| 1 . | Thickness: 2 to 3 mm |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 3.0 mm/min |
| 5 . | 3.0 mm/min |
| 6 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecomid® NB40 NL IL | Eurotec Engineering Plastics | Nylon 6 | Tecomid® |
| Moplen HP648N | LyondellBasell Industries | PP Homopolymer | Moplen |
| Formolene® HB5502Z | Formosa Plastics Corporation, U.S.A. | HDPE | Formolene® |
| INEOS PP H02G-02 | INEOS Olefins & Polymers USA | PP Homopolymer | INEOS PP |
| Plaslube® PA6/6 GF15 ML3 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
