Order Products : sales@su-jiao.com
Therma-Tech™ TT9200-8705 EI Black
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Therma-Tech™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mB3rLl_Therma-Tech-TT9200-8705-EI-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Therma-Tech™ Thermal Management Compounds have been engineered to combine the heat transfer and cooling capabilities of metals with the design freedom, weight reduction and cost advantages of thermoplastics. These materials provide the benefits of proprietary conductive additive technologies and the performance of select engineering thermoplastic resins. Therma-Tech compounds have been shown to improve thermal conductivity up to 100-times that of conventional plastics and can be used in a wide range of thermal management applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.64 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(3.20 mm) | 14800 | MPa | ASTM D638 |
| Tensile Strength 2(3.20 mm) | 83.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, 3.20 mm) | 1.0 | % | ASTM D638 |
| Flexural Modulus 4(3.20 mm) | 11700 | MPa | ASTM D790 |
| Flexural Strength 5(3.20 mm) | 128 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.40 mm) | 43 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 277 | °C | |
| 1.8 MPa, Unannealed | 260 | °C | |
| Thermal Conductivity 6 | 2.0 | W/m/K | ASTM E1461 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+12 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.20 mm) | V-0 | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 140 to 150 | °C | |
| Drying Time | 4.0 to 6.0 | hr | |
| Processing (Melt) Temp | 320 to 330 | °C | |
| Mold Temperature | 140 to 160 | °C |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 5.0 mm/min |
| 5 . | 5.0 mm/min |
| 6 . | In-Plane |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POWERSIL® 466 LV A/B | Wacker Chemie AG | Silicone | POWERSIL® |
| RTP 303 EM | RTP Company | PC | RTP |
| EcoVid 30GBIM | Greener Polymers Inc. | PLA | EcoVid |
| ELASTOSIL® N 288 | Wacker Chemie AG | Silicone | ELASTOSIL® N |
| ISOLOSS® HD | E-A-R Specialty Composites | TSU | ISOLOSS® |
