Order Products : sales@su-jiao.com
Vibrathane® B839
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Chemtura |
| Trademark: | Vibrathane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | m5m36F_Vibrathane-B839.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
VIBRATHANE B839 is a polyether-based, TDI terminated liquid urethane prepolymer that is readily processable by conventional hand and machine mixing techniques. When cured with 4,4'-Methylene-Bis[2-Chloroaniline], this member of the VIBRATHANE family produces high quality vulcanizates in the 97 Shore A hardness range. These tough, high resilience elastomers are characterized by:
Typical applications for these high performance elastomers are wheels, linings, and wear resistant coatings. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 97 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 13.1 | MPa | |
| 300% Strain | 29.0 | MPa | |
| Tensile Strength | 33.1 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 340 | % | ASTM D412 |
| Tear Strength | |||
| -- 1 | 133 | kN/m | ASTM D624 |
| Split | 30 | kN/m | ASTM D470 |
| Compression Set (70°C, 22 hr) | 29 | % | ASTM D395B |
| Bayshore Resilience | 44 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 18 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Pot Life | 3.0 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Abrasion Index - NBS | 300 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Curing Time (100°C) | 0.50 | hr |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shinko-Lac® ASA TW20 | Mitsubishi Rayon America Inc. | ASA | Shinko-Lac® |
| UNIBRITE® UB-830 | Nippon A&L Inc. | AES | UNIBRITE® |
| ULTZEX™ 3021F | Prime Polymer Co., Ltd. | LLDPE | ULTZEX™ |
| apilon 52® TL 25 | API SpA | TPU-Polyether | apilon 52® |
| HiFill® PA6/6 GB25 L BK | Techmer Engineered Solutions | Nylon 66 | HiFill® |
