Order Products : sales@su-jiao.com
INFUSE™ 9100
| Category: | OBC , Olefin Block Copolymer |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | INFUSE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | m4fAON_INFUSE-9100.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
INFUSE™ 9100 Olefin Block Copolymer is a high performance olefin block copolymer that can be widely used in thermoplastic elastomer applications where higher service temperature requirements are needed. INFUSE 9100 exhibits very good processability in various extrusion processes. INFUSE 9100 also provides high filler loading capability along with low compression set over a wide temperature range. Main Characteristics
Complies with
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.877 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, Compression Molded) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 100% Secant (Compression Molded) | 2.79 | MPa | ASTM D638 |
| Tensile Strength (Break, Compression Molded) | 6.60 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 480 | % | ASTM D638 |
| Flexural Modulus - 2% Secant (Compression Molded) | 19.1 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 13.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 1300 | % | ASTM D412 |
| Tear Strength | 40.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 21°C | 19 | % | |
| 70°C | 47 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 120 | °C | Internal Method |
| TMA 1(1.00 mm) | 114 | °C | Internal Method |
| Note Message | |
|---|---|
| 1 . | 1N, 5°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL PC-GP4-(color)-1 | Polymer Resources Ltd. | PC | PRL |
| Sylvin 2935-70 Blue 8377 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| NEFTEKHIM PP PP1525J | Nizhnekamskneftekhim Inc. | PP Homopolymer | NEFTEKHIM PP |
| China PPS hGR20 | Sichuan Deyang Chemical Co., Ltd | PPS | China PPS |
| Elastocon® STK56PA-B | Elastocon TPE Technologies | TPE | Elastocon® |
