Order Products : sales@su-jiao.com
KRATON® D1111 K
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | m1nYzF_KRATON-D1111-K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1111 K is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below.
Kraton D1111 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.930 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 2.0 | g/10 min | |
| Antioxidant Additive | 0.080 to 0.30 | % | Internal Method |
| Ash Content 1 | 0.25 to 0.45 | % | Internal Method |
| Polystyrene Content | 20 to 24 | % | Internal Method |
| Solution Viscosity - Toluene, 25%wt | 0.75 to 1.3 | Pa·s | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.70 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 18.0 | ||
| Styrene/Rubber ratio | 22/78 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 45 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 1.38 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 20.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 1200 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Talc |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® A9730 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| PureTherm® 3007C Opaque | Tekni-Films, a div of Tekni-Plex | Film, PVC | PureTherm® |
| SILPURAN® 2445 A/B | Wacker Chemie AG | Silicone | SILPURAN® |
| Topolymer® M-601J | Dongguan Top Polymer Enterprise | TPE | Topolymer® |
| Cheng Yu E500G10 | Cheng Yu Plastic Company Limited | PC+PET | Cheng Yu |
