Order Products : sales@su-jiao.com
INLUBE PA12GF15TF15
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Infinity LTL Engineered Compounds |
| Trademark: | INLUBE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lulbHo_INLUBE-PA12GF15TF15.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| INLUBE PA12GF15TF15 is a Polyamide 12 (Nylon 12) product filled with 15% glass fiber. It is available in North America. Primary characteristic: lubricated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.40 to 0.80 | % | |
| Water Absorption (24 hr) | 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 80.7 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 4.0 to 6.0 | % | ASTM D638 |
| Flexural Modulus | 3100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 140 | J/m | ASTM D256 |
| Unnotched Izod Impact | 640 to 850 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 160 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+17 | ohms | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Processing (Melt) Temp | 227 to 238 | °C | |
| Mold Temperature | 71.1 to 82.2 | °C | |
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 40 to 70 | rpm | |
| Vent Depth | 0.013 to 0.025 | mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RANPELEN SFI-841 | Lotte Chemical Corporation | PP Terpolymer | RANPELEN |
| SPESIN® KP213G30SB3 | Kolon Plastics, Inc. | PBT | SPESIN® |
| SUPREME Specialty PS SP265 | Supreme Petrochem Ltd. | PS (Specialty) | SUPREME Specialty PS |
| Nycal™ 1850R15H | Technical Polymers, LLC | Nylon 6 | Nycal™ |
| ELASTOSIL® AUX PRIMER G 3242 | Wacker Chemie AG | Silicone | ELASTOSIL® AUX |
