Order Products : sales@su-jiao.com
ADMER™ QF830E
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Mitsui Chemicals Europe GmbH |
| Trademark: | ADMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lrDgqp_ADMER-QF830E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ADMER® QF830E is a maleic anhydride grafted, co-PP-based grade designed for retort products. It shows high adhesion and good processability in co-extrusion coating application between PP and EVOH, PA, Aluminum or Paper. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 13 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 20.0 | MPa | |
| Break | 25.0 | MPa | |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Area) | 0.0760 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 122 | °C | ASTM D1525 |
| Peak Melting Temperature | 146 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Provista™ Copolymer UVO | Eastman Chemical Company | Polyester, TP | Provista™ |
| Trademark PP PPC2040M | Trademark Plastics Corporation | PP Impact Copolymer | Trademark PP |
| VisiJet® M3 Crystal | 3D Systems | Unspecified | VisiJet® |
| APEX® 90-A472R-70-NT | Teknor Apex Company | PVC, Flexible | APEX® |
| Geon™ Vinyl Flexible 90251 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
