Order Products : sales@su-jiao.com
POLYCOMPO PE 102
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lq0GpD_POLYCOMPO-PE-102.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE 102 is a Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific. Typical application: Wrap. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.921 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 0.35 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 51 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Compression Molded) | 19.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Compression Molded) | 400 | % | ISO 527-2 |
| Flexural Modulus (Compression Molded) | 200 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 92.0 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 109 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEXUS PE HDPE-1062 | Nexus Resin Group, LLC. | HDPE | NEXUS PE |
| ALCOM® PC 740/4 GY1156-04LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| EVALENE® HDPE HP17411 | JG Summit Petrochemical Corporation | HDPE | EVALENE® HDPE |
| En Chuan 6123TA-D | En Chuan Chemical Industries Co,. Ltd. | Polyester, TS | En Chuan |
| KOPLA PA6 KNP1000 | KOPLA Co., Ltd. | Nylon 6 | KOPLA PA6 |
