Order Products : sales@su-jiao.com
SABIC® LDPE 2602H0
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lp6X7K_SABIC-LDPE-2602H0.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® LDPE 2602H0 is a grade with very good optical properties. The grade contains no additives, has an increased density and shows a very good draw down ability. The films are characterized by good mechanical properties. Application Blown Film: SABIC® LDPE 2602H0 is typically developed for applications where enhanced stiffness is required. Cast Film: SABIC® LDPE 2602H0 is typically developed for applications, where enhanced stiffness is required. It is used in combination with LLDPE for e.g. diaper film or underblankets. This grade is also suitable for bubble film. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.9 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (Blown Film) | > 1.0 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Elastic Modulus - MD (25 µm, Cast Film) | 140 | MPa | ASTM D882 |
| Elastic Modulus - TD (25 µm, Cast Film) | 160 | MPa | ASTM D882 |
| Tensile Modulus | ISO 527-3 | ||
| MD : 25 µm, blown film | 250 | MPa | ISO 527-3 |
| TD : 25 µm, blown film | 260 | MPa | ISO 527-3 |
| Tensile Strength | |||
| MD : Yield, 25 µm, extruded film | 10.0 | MPa | ASTM D882 |
| TD : Yield, 25 µm, extruded film | 10.0 | MPa | ASTM D882 |
| MD : Yield, 25 µm, blown film | 13.0 | MPa | ISO 527-3 |
| TD : Yield, 25 µm, blown film | 13.0 | MPa | ISO 527-3 |
| MD : Broken, 25 µm, extruded film | 21.0 | MPa | ASTM D882 |
| TD : Broken, 25 µm, extruded film | 21.0 | MPa | ASTM D882 |
| MD : Broken, 25 µm, blown film | 30.0 | MPa | ISO 527-3 |
| TD : Broken, 25 µm, blown film | 20.0 | MPa | ISO 527-3 |
| Tensile Elongation | |||
| MD : Broken, 25 µm, extruded film | 300 | % | ASTM D882 |
| TD : Broken, 25 µm, extruded film | 350 | % | ASTM D882 |
| MD : Broken, 25 µm, blown film | > 200 | % | ISO 527-3 |
| TD : Broken, 25 µm, blown film | > 500 | % | ISO 527-3 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Strength | ASTM D4272 | ||
| Blown Film : 25.0 µm | 150 | J/cm | ASTM D4272 |
| Cast Film : 25.0 µm | 130 | J/cm | ASTM D4272 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Blocking - Blown Film (25.0 µm) | 10 | g | Internal method |
| Re-blocking - Blown Film (25.0 µm) | 30 | g | Internal method |
| Tear Strength 1 | ISO 6383-2 | ||
| MD : 25.0 µm | 90.0 | kN/m | ISO 6383-2 |
| TD : 25.0 µm | 40.0 | kN/m | ISO 6383-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 99.0 | °C | ISO 306/A |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss | ASTM D2457 | ||
| 45, 25.0 µm, blown film | 64 | ASTM D2457 | |
| 45, 25.0 µm, cast film | 86 | ASTM D2457 | |
| Haze | ASTM D1003 | ||
| 25.0 µm, blown film | 7.0 | % | ASTM D1003 |
| 25.0 µm, cast film | 1.5 | % | ASTM D1003 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Blown FilmFilm properties have been measured at film of 25 µm with a BUR of 3.The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm.Cast FilmThe optical and film properties are determined on 25 µm cast film. Die gap 1.0 mm. |
| Note Message | |
|---|---|
| 1 . | Blown Film |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1382 TFE 15 | RTP Company | PPS | RTP |
| Starpylen HZ 30WF2 | Eurostar Engineering Plastics | PP, Unspecified | Starpylen |
| Comai 209-1 NT | Comai Ltda | PP Copolymer | Comai |
| DOMAMID® 6AV | DOMO Engineering Plastics SPA | Nylon 6 | DOMAMID® |
| G-Lex 19 PC | Gardiner Compounds Ltd. | PC | G-Lex |
