Order Products : sales@su-jiao.com
STYRON A-TECH™ 1300
| Category: | PS (HIPS) , Polystyrene Resin |
| Manufacturer: | Trinseo |
| Trademark: | STYRON A-TECH™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lk58UP_STYRON-A-TECH-1300.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
STYRON A-TECH™ 1300 advanced technology polystyrene resin is a high impact polystyrene resin offering excellent toughness and strength with good processability. Main Characteristics:
Applications:
Complies with:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 4.5 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 to 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 24.1 | MPa | |
| Yield, Injection Molded | 27.6 | MPa | |
| Break, Compression Molded | 19.3 | MPa | |
| Break, Injection Molded | 27.6 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Break, Compression Molded | 45 | % | |
| Break, Injection Molded | 50 | % | |
| Flexural Modulus | ASTM D790 | ||
| Compression Molded | 1800 | MPa | |
| Injection Molded | 2010 | MPa | |
| Flexural Strength | ASTM D790 | ||
| Compression Molded | 42.1 | MPa | |
| Injection Molded | 50.3 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 23°C, Compression Molded | 110 | J/m | |
| 23°C, Injection Molded | 130 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed | 75.0 | °C | |
| 1.8 MPa, Annealed | 98.9 | °C | |
| Vicat Softening Temperature | 105 | °C | ASTM D1525 |
| CLTE - Flow | 7.6E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 1(1.50 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6.6 7500 GF 30 H | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| CoREZYN® COR30-DA-250 | Interplastic Corporation | Polyester, TS | CoREZYN® |
| EPO-TEK® 353ND-T Black | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Karina IVORY PVC COMPOUND 105471-35/1-Y-IS-SD | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| LUVOCOM® 1/GF/20/TF/10/SI/2/BK | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
