Europrene® N 3330 GRN

Category:	NBR , Acrylonitrile Butadiene Rubber
Manufacturer:	Versalis S.p.A.
Trademark:	Europrene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	lho16P_Europrene-N-3330-GRN.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Europrene® N 3330 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the PortoTorres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 3330 GRN is characterised by a low Mooney Viscosity that allow and excellent processability mostly in injection moulding applications. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. All injection moulding applications (low mould fouling).

Message

Europrene® N 3330 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the PortoTorres production facility in Italy. A non staining antioxidant is added during the production process.

Europrene® N 3330 GRN is characterised by a low Mooney Viscosity that allow and excellent processability mostly in injection moulding applications. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process.

All injection moulding applications (low mould fouling).

General Information
Additive	Antioxidant
Features	Antioxidant Fast Cure Fuel Resistant Good Processability Low Temperature Flexibility Low Viscosity Oil Resistant
Appearance	Yellow
Forms	Bale
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Mooney Viscosity (ML 1+4, 100°C)	30	MU	ASTM D1646
Acrylonitrile Content	33.0	wt%	ASTM D3533
Ash Content	< 0.5	wt%	ASTM D5667
Organic Acid	< 0.5	wt%	ASTM D5774
Soap	< 0.6	wt%	ASTM D5774
Volatile Matter	< 0.70	wt%	ASTM D5668

Resin Grade	Manufacturer	Category	Trademark
Rilsan® BESN P10 T	Arkema	Nylon 11	Rilsan®
PRIMALENE WPP692M	Southern Polymer, Inc.	mLLDPE	PRIMALENE
ColorRx® TPE-T54A0RXTL	LTL Color Compounders, Inc.	TPE	ColorRx®
Jam HD-7260 (I3)	Jam Petrochemical Company	HDPE	Jam
ESTOPLAST XU 430GY43	Ester Industries Ltd.	Nylon 6	ESTOPLAST XU