Order Products : sales@su-jiao.com
Generic Phenolic - Glass Fiber, S-Glass
| Category: | Phenolic , Phenolic |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lg3Fnx_Generic-Phenolic---Glass-Fiber-S-Glass.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Phenolic - Glass Fiber, S-Glass This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.79 to 2.09 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.17 to 0.23 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.10 to 0.15 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 100 to 118 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 34.5 to 68.9 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 13800 to 16000 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 51.7 to 172 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 191 to 278 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 21 to 33 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 189 to 216 | °C | ASTM D648 |
| CLTE - Flow | 1.4E-5 to 2.2E-5 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity (23°C) | 0.42 to 0.59 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 3.5E+2 to 2.0E+13 | ohms·cm | ASTM D257 |
| Dielectric Strength (23°C) | 13 to 16 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C) | 4.50 to 5.03 | ASTM D150 | |
| Dissipation Factor (23°C) | 0.020 to 0.030 | ASTM D150 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| APEX® 04-A769R-80NT | Teknor Apex Company | PVC, Flexible | APEX® |
| APEX® 3095-H | Teknor Apex Company | PVC, Flexible | APEX® |
| Clearflex® MP D0 | Versalis S.p.A. | VLDPE | Clearflex® |
| ENGAGE™ 8452 EL | The Dow Chemical Company | TPO (POE) | ENGAGE™ |
| Kumho SBR 1712 | Korea Kumho Petrochemical Co., Ltd. | SBR, Emulsion | Kumho SBR |
