Order Products : sales@su-jiao.com
Elastocon® 2825PE
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lbLvis_Elastocon2825PE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® 2825PE thermoplastic elastomer has been developed for applications that require rubber-like properties and a good surface finish. Elastocon® 2825PE is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 2825PE can be overmolded and coextruded with polyethylene. Elastocon® 2825PE is supplied as ready to use pellets in 50 lb. quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.880 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 25 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.740 | MPa | ASTM D412 |
| Tensile Strength | 2.40 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 540 | % | ASTM D412 |
| Tear Strength | 12.3 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 138 - 160 | °C | |
| Front Temperature | 166 - 182 | °C | |
| Nozzle Temperature | 182 - 204 | °C | |
| Mold Temperature | 16 - 49 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.345 - 0.689 | MPa | |
| Screw Compression Ratio | 2.5:1.0 - 3.0:1.0 |
| Injection instructions |
|---|
| Elastocon® 2825PE thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | 79 | °C | |
| Cylinder Zone 1 Temp. | 191 | °C | |
| Cylinder Zone 5 Temp. | 232 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 GF 50 000/2M | Plastcom | Nylon 6 | SLOVAMID® 6 |
| DOW™ LLDPE 6500 | The Dow Chemical Company | LLDPE | DOW™ LLDPE |
| AKROMID® B3 2 RM-D black (3255) | AKRO-PLASTIC GmbH | Nylon 6+ABS | AKROMID® |
| CYCOLOY™ C7410 resin | SABIC Innovative Plastics Asia Pacific | PC+ABS | CYCOLOY™ |
| Grilon® TSG-50/4 | EMS-GRIVORY | Nylon 66/6 | Grilon® |
