Order Products : sales@su-jiao.com
Generic LCP - Mineral
| Category: | LCP , Liquid Crystal Polymer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lZnCt0_Generic-LCP---Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic LCP - Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.63 - 1.81 | g/cm³ | ISO 1183 |
| Molding Shrinkage (23°C) | -0.010 - 0.50 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 7500 - 11500 | MPa | ISO 527-2 |
| Tensile Stress | |||
| Fracture, 23°C | 105 - 160 | MPa | ISO 527-2 |
| 23°C | 62.1 - 127 | MPa | ASTM D638 |
| Tensile Strain (Break, 23°C) | 3.0 - 5.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 9000 - 11900 | MPa | ISO 178 |
| Flexural Stress (23°C) | 120 - 180 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 2.0 - 59 | kJ/m² | ISO 179 |
| Notched Izod Impact (23°C) | 3.0 - 27 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 190 - 246 | °C | ISO 75-2/A |
| Melting Temperature | 280 - 351 | °C | ISO 11357-3 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 1.0E+12 - 3.0E+16 | ohms·cm | IEC 60093 |
| Dielectric Strength (23°C) | 21 - 46 | kV/mm | IEC 60243-1 |
| Relative Permittivity (23°C) | 3.51 | IEC 60250 | |
| Dissipation Factor (23°C) | 9.5E-3 - 0.031 | IEC 60250 | |
| Comparative Tracking Index | 174 - 201 | V | IEC 60112 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 149 - 170 | °C | |
| Drying Time | 3.0 - 8.0 | hr | |
| Hopper Temperature | 25.0 - 25.4 | °C | |
| Rear Temperature | 275 - 341 | °C | |
| Middle Temperature | 280 - 326 | °C | |
| Front Temperature | 285 - 332 | °C | |
| Nozzle Temperature | 295 - 355 | °C | |
| Processing (Melt) Temp | 290 - 381 | °C | |
| Mold Temperature | 79.4 - 100 | °C | |
| Injection Pressure | 99.5 - 100 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic LCP - MineralThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrant EPP Armor-X™ Non-Marring | Quadrant Engineering Plastic Products | TP, Unspecified | Quadrant EPP |
| SPESIN® KP270GR | Kolon Plastics, Inc. | PBT | SPESIN® |
| Surlyn® PC100 | DuPont Packaging & Industrial Polymers | Ionomer | Surlyn® |
| TOTAL Polypropylene PPH 12020 | TOTAL Refining & Chemicals | PP Homopolymer | TOTAL Polypropylene |
| Infino LS-3104G | SAMSUNG SDI CO., LTD. | PC | Infino |
