Order Products : sales@su-jiao.com
Sumitomo DAP FS-6 CAF
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Sumitomo DAP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lZMSXe_Sumitomo-DAP-FS-6-CAF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FS-6 CAF is a mineral filled, non-flame retardant, diallyl meta-phthalate molding compound, which meets the requirements of ASTM D5948 Type MIG. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.86 | g/cm³ | ASTM D792 |
| Apparent Density | 0.80 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow (Compression Molded) | 0.30 to 0.50 | % | ASTM D955 |
| Water Absorption - 48 hr (50°C) | 0.50 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Compression Molded) | 55.0 | MPa | ASTM D638 |
| Flexural Modulus (Compression Molded) | 12000 | MPa | ASTM D790 |
| Flexural Strength (Compression Molded) | 103 | MPa | ASTM D790 |
| Compressive Strength | 145 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 22 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded) | 270 | °C | ASTM D648 |
| CLTE - Flow | 2.5E-5 | cm/cm/°C | ASTM E831 |
| RTI Elec | 130 | °C | UL 746 |
| RTI Imp | 130 | °C | UL 746 |
| RTI Str | 130 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | ASTM D149 | ||
| -- 2 | 15 | kV/mm | |
| -- 3 | 14 | kV/mm | |
| Dielectric Constant 4 | ASTM D2520 | ||
| 1 kHz | 4.30 | ||
| 1 MHz | 4.10 | ||
| Dissipation Factor 5 | ASTM D150 | ||
| 1 kHz | 0.020 | ||
| 1 MHz | 0.025 | ||
| Arc Resistance | 175 | sec | ASTM D495 |
| Comparative Tracking Index | > 600 | V | IEC 60112, ASTM D3638 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 23 | % | ASTM D2863 |
| Note Message | |
|---|---|
| 1 . | Wet, 60 Hz |
| 2 . | Method A (Short-Time) |
| 3 . | Method B (Step-by-Step) |
| 4 . | Wet |
| 5 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® XC 1440 BLACK | Solvay Engineering Plastics | Nylon 6 | TECHNYL® |
| ACRYLITE® Film 0F011 | Evonik Cyro LLC | Film, PMMA | ACRYLITE® Film |
| Anjacom® R050/7020 Black 91001 | Almaak International GmbH | PC+ABS | Anjacom® |
| APICAL 100NP | Kaneka North America LLC | Film, PI | APICAL |
| GLAMIDE® T-669VGB | TOYOBO America, Inc. | Nylon 66 | GLAMIDE® |
