Order Products : sales@su-jiao.com
Badaflex® TPE-S 40A 1462 AB transparent
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Bada AG |
| Trademark: | Badaflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lYmlND_Badaflex-TPE-S-40A-1462-AB-transparent.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Transparent, low density Thermoplastic Elastomer for injection moulding based on SEBS Copolymer Overmoulding capability: Polypropylene (PP) |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | DIN 53479 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 40 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 5.50 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 610 | % | DIN 53504 |
| Compression Set (23°C, 72 hr) | 16 | % | ISO 815 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 9.0 | kN/m | DIN 53515 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 - 220 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® ARVO 950 TLD | Arkema | Nylon 12 | Rilsan® |
| RTP 201 GB 20 | RTP Company | Nylon 66 | RTP |
| Cheng Yu FRV | Cheng Yu Plastic Company Limited | ABS | Cheng Yu |
| DINALON® B1S25 | Grupo Repol | Nylon 6 | DINALON® |
| EPO-TEK® H24 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
