Order Products : sales@su-jiao.com
Moplen HP741H
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lTii7l_Moplen-HP741H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Moplen HP741H is a polypropylene homopolymer. With its high clarity and good impact stiffness balance, this grade is especially suitable for solid phase pressure thermoforming process. Potential end use products include drinking, yoghurt cups, dairy packaging, general food container, etc. all of which can be hot fillable or microwaveable. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 38.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 8.0 | % | ASTM D638 |
| Flexural Modulus | 1800 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 45 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 113 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 303 L | RTP Company | PC | RTP |
| Tenite™ Propionate 380A3V32818 Clear, Trsp | Eastman Chemical Company | CAP | Tenite™ Propionate |
| Bergamid™ B70 GK50 H NC001 | PolyOne Corporation | Nylon 6 | Bergamid™ |
| INEOS PP H44N-00 | INEOS Olefins & Polymers USA | PP Homopolymer | INEOS PP |
| EPAMOULD 672D12 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
