Order Products : sales@su-jiao.com
Nycal™ 1850RMC40
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Technical Polymers, LLC |
| Trademark: | Nycal™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lSiMcb_Nycal-1850RMC40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nycal™ 1850RMC40 is a Polyamide 6 (Nylon 6) material filled with 40% glass\mineral. It is available in North America for injection molding. Primary attribute of Nycal™ 1850RMC40: Flame Rated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.47 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 128 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 2.0 to 4.0 | % | ASTM D638 |
| Flexural Modulus (23°C) | 7930 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 210 | °C | |
| 1.8 MPa, Unannealed | 202 | °C | |
| Peak Melting Temperature | 220 | °C | ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+14 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 73.9 to 79.4 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Processing (Melt) Temp | 260 to 293 | °C | |
| Mold Temperature | 65.6 to 98.9 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.103 to 0.689 | MPa | |
| Screw Speed | 50 to 100 | rpm | |
| Clamp Tonnage | 3.4 to 5.5 | kN/cm² | |
| Cushion | 3.18 to 12.7 | mm | |
| Screw L/D Ratio | 20.0:1.0 | ||
| Screw Compression Ratio | 2.5:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205D HS | RTP Company | Nylon 612 | RTP |
| RTP 204 GB FR | RTP Company | Nylon 66 | RTP |
| Precision Polymer N83B | Precision Polymer Engineering Ltd. | NBR | Precision Polymer |
| Lucel® FW720F | LG Chem Ltd. | Acetal (POM) Copolymer | Lucel® |
| Rotuba CAP CP800 (13% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
