Order Products : sales@su-jiao.com

Perfactory® E-Partial

Category:	Acrylic, Unspecified , Acrylic
Manufacturer:	EnvisionTEC, Inc.
Trademark:	Perfactory®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	lQ8lAA_Perfactory-E-Partial.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
EnvisionTEC‘s E-Partial chemistry was developed for building partials where some flex is required without damage. E-Partial material maintains flexural strength to ensure clasp flex without breakage. The stiffness of E-Partial allows for production of a very hard retention grid and super tight thin clasps to deliver a metal partial with the perfect fit every time. The Perfactory® 4 DDP 3D printer gives you high accuracy printing with unmatched speed. Printing partials is a snap in the E-Partial material and the Perfactory® 4 DDP 3D Printer. Unattended production means the machine can work while you are away. It will even turn itself off after completing a build. Applications Dental Recommended Machines: Perfactory® 4 DDP Series

Message

EnvisionTEC‘s E-Partial chemistry was developed for building partials where some flex is required without damage. E-Partial material maintains flexural strength to ensure clasp flex without breakage. The stiffness of E-Partial allows for production of a very hard retention grid and super tight thin clasps to deliver a metal partial with the perfect fit every time. The Perfactory® 4 DDP 3D printer gives you high accuracy printing with unmatched speed. Printing partials is a snap in the E-Partial material and the Perfactory® 4 DDP 3D Printer. Unattended production means the machine can work while you are away. It will even turn itself off after completing a build.

Applications
Dental

Recommended Machines:
Perfactory® 4 DDP Series

General Information
Features	Good Flexibility Good Stiffness Outstanding Surface Finish
Uses	Dental Applications
Forms	Liquid
Processing Method	3D Printing, Stereolithography

Physical	Nominal Value	Unit
Specific Gravity	1.10 to 1.11	g/cm³
Viscosity (25°C)	760	mPa·s

Hardness	Nominal Value	Unit
Durometer Hardness (Shore D)	89

Mechanical	Nominal Value	Unit
Tensile Strength	57.0	MPa
Tensile Elongation (Break)	3.6	%
Flexural Modulus	3160	MPa
Flexural Strength	129	MPa

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load ¹			ASTM D648
0.45 MPa, Unannealed	130	°C
1.8 MPa, Unannealed	78.0	°C

Note Message
1 .	No heat treatment necessary

Resin Grade	Manufacturer	Category	Trademark
PRESEAL® TPE 6070	Premix Oy	TPE	PRESEAL®
Sylvin 8036-70 CLEAR	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Durethan® BC 700 HTS DUSXBL 900116	LANXESS GmbH	Nylon 6	Durethan®
PERLEX® R5550	A. Schulman Europe	PC	PERLEX®
POCAN® KU 2-7604 000000	LANXESS Corporation	PC+PBT	POCAN®