Order Products : sales@su-jiao.com
DEXFLEX® 1010E
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | DEXFLEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lPif50_DEXFLEX-1010E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DEXFLEX 1010E is a thermoplastic olefinic elastomer (TPO) developed for automotive airbag covers. This material is being designed to provide low-temperature impact, superior dimensional stability and improved processing characteristics. DEXFLEX 1010E material will be provided precolored or natural. DEXFEX 1010E material is engineered for passenger-side airbag covers. Its superior dimensional stability makes it desirable for top-mounted applications, either as a substrate or a cover material |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage 1 | 0.50 to 0.90 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield) | 18.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 15 | % | ASTM D638 |
| Flexural Modulus - Tangent 3 | 600 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C | No Break | ||
| 23°C | No Break |
| Note Message | |
|---|---|
| 1 . | Measured on internal test specimen |
| 2 . | Type IV, 130 mm/min |
| 3 . | Method I (3 point load), 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® LL6F 804 | Marco Polo International, Inc. | LLDPE | MARPOL® |
| RheTech Polypropylene CC20P100-00 | RheTech, Inc. | PP, Unspecified | RheTech Polypropylene |
| TEREZ PA/ABS Blend 3610/4 GK 10 | TER HELL PLASTIC GMBH | ABS+Nylon | TEREZ PA/ABS |
| HONES® PPS HS-G50 | Guangdong Shunde Hones Polymer Material Co., Ltd. | PPS | HONES® |
| CYCOLAC™ MG38 resin | SABIC Innovative Plastics | ABS | CYCOLAC™ |
