Order Products : sales@su-jiao.com
ASI POLYETHYLENE LP 502-01
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | ASI POLYETHYLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lNXgdn_ASI-POLYETHYLENE-LP-502-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LP 502-01 Natural is a high molecular weight, high-density polyethylene copolymer, designed for blow molding of large parts where the finished product demands outstanding physical performance. This material has excellent processability and balanced end-use properties such as environmental stress crack resistance with superior impact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.950 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 11 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | 500 | hr | ASTM D1693A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 24.8 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 800 | % | ASTM D638 |
| Flexural Modulus - Tangent | 1140 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 400 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 72.2 | °C | ASTM D648 |
| Brittleness Temperature | -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 132 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toughblend® PA66-1300 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | Nylon 6 | Toughblend® |
| ULTEM™ 2210R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| TOTAL Polyethylene Lumicene® M 4041 UV black | TOTAL Refining & Chemicals | mMDPE | TOTAL Polyethylene |
| TECACOMP® PEEK 450 GF30 black 3689 | Ensinger GmbH | PEEK | TECACOMP® |
| CYCOLAC™ G320A resin | SABIC Innovative Plastics Europe | ABS | CYCOLAC™ |
