Order Products : sales@su-jiao.com
Petlon Prime A1-G30-00-NT
| Category: | Nylon 66 , Polyamide 6 |
| Manufacturer: | Petlon Polymers Ltd |
| Trademark: | Petlon Prime |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lNDXm4_Petlon-Prime-A1-G30-00-NT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Prime Nylon 6, 30% Glass Reinforced, Natural Compound. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.36 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.30 to 0.60 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 170 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 12 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | 80 | kJ/m² | ISO 179/1eU |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Processing (Melt) Temp | 260 to 280 | °C | |
| Mold Temperature | 70.0 to 120 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYsan FL100 F35 | Polykemi AB | SAN | POLYsan |
| Sanren M3500CA (On-spec.) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Homopolymer | Sanren |
| ACCUTECH™ HP0339C20L1 | ACLO Compounders Inc. | PP Homopolymer | ACCUTECH™ |
| APICAL 300AF021 | Kaneka Corporation | PI, TS | APICAL |
| Elastron® V V201.D40.N | Elastron USA, Inc. | TPV | Elastron® V |
