Order Products : sales@su-jiao.com
Elastocon® 9050
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lHkwBP_Elastocon9050.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® 9050 is a natural thermoplastic elastomer formulated for applications that require high impact resistance and a good surface finish. Elastocon® 9050 is well suited for customer goods and industrial applications requiring U.V. stability. Elastocon® 9050 is supplied as ready to use pellets in 50 lb. quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 50 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 8.70 | MPa | ASTM D412 |
| Tensile Strength | 13.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 520 | % | ASTM D412 |
| Tear Strength | 75.0 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 - 193 | °C | |
| Front Temperature | 182 - 199 | °C | |
| Nozzle Temperature | 188 - 204 | °C | |
| Mold Temperature | 21 - 38 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.689 - 1.38 | MPa | |
| Screw Compression Ratio | 2.5:1.0 - 3.0:1.0 |
| Injection instructions |
|---|
| Elastocon® 9050 thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | 79 | °C | |
| Cylinder Zone 1 Temp. | 191 | °C | |
| Cylinder Zone 5 Temp. | 232 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prime Tuff-X STF | Primex Plastics Corporation | TPE Alloy | Prime Tuff-X |
| Resinoid 1324 | Resinoid Engineering Corporation | Phenolic | Resinoid |
| 4MID® 9A20500 FR7 | 4Plas | Nylon 66 | 4MID® |
| LNP™ THERMOCOMP™ MX89510 compound | SABIC Innovative Plastics | PP, Unspecified | LNP™ THERMOCOMP™ |
| Sylvin 9077-70 Grey 9534 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
