Order Products : sales@su-jiao.com
Formolene® L63568U
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lHS8pT_Formolene-L63568U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene L63568U is a general-purpose rotational molding linear low density resin made using the BP Gas Phase Process™. The resin exhibits excellent ESCR and low temperature impact strength. The resin is also fully UV stabilized. Formolene L63568U meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. Suggested Applications:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.8 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693A | ||
| 10% Igepal, Compression Molded, F50 | 200 | hr | |
| 100% Igepal, Compression Molded, F50 | > 1000 | hr |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 18.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Compression Molded) | 12 | % | ASTM D638 |
| Flexural Modulus 3(Compression Molded) | 68.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Low Temperature Impact - Compression Molded (-40°C, 3.18 mm) | 61.0 | J | ARM |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 50.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 6201-75 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Dartek N-201 | DuPont Canada, Inc. - Dartek Division | Nylon 66 | Dartek |
| DJSilicone NE-Z140 | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| ENVIROLOY® ENV15-NC370 | ENVIROPLAS®, Inc. | PC+ABS | ENVIROLOY® |
| Pearlbond鈩?521 | Lubrizol Advanced Materials, Inc. | TPU-Capro | Pearlbond™ |
