Order Products : sales@su-jiao.com
ICORENE® N9501
| Category: | SAN , Styrene Acrylonitrile |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lH4D6x_ICORENE-N9501.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® N9501 is a styrene-acrylonitrile (SAN) copolymer with good chemical resistance and a very low residual monomers content. This general purpose grade is characterized by it's high clarity and it's good mechanical properties. ICORENE® N9501 is recommended for injection. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.07 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 22 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, 5.00 mm) | 67.0 | MPa | ISO 527-2 |
| Tensile Elongation 1(Break) | 2.5 | % | ISO 527 |
| Flexural Stress | 105 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 12 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 98.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 108 | °C | ISO 306 |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 9654-70 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Utomer UT81P95A | Shanghai Utomer Material Science Co., Ltd. | TPU-Polyether | Utomer |
| Bergamid™ A70 G14 TM-X NC060 | PolyOne Corporation | Nylon 66 | Bergamid™ |
| KOPLA PA6 KNG1060F | KOPLA Co., Ltd. | Nylon 6 | KOPLA PA6 |
| Sylvin 7833-70C Red 6199 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
