Order Products : sales@su-jiao.com
CONAPOXY® FR-1810
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | CONAPOXY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lDaHhA_CONAPOXY-FR-1810.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CONAPOXY FR-1810 is a flexible two-component, low exotherm, flame retardant, long pot life epoxy potting and casting system with excellent handling properties. CONAPOXY FR-1810 contains a non-abrasive filler to reduce wear on machine metering/dispensing equipment. CONAPOXY FR-1810 has been tested by Underwriters Laboratories to be RoHS compliant and recognized to UL 94V-0. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 1.54 | g/cm³ | |
| -- 2 | 1.55 | g/cm³ | |
| Water Absorption (24 hr) | 0.41 | % |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 80 to 85 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 9.14 | MPa | |
| Tensile Elongation (Break) | 22 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Thermal Conductivity | 0.70 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 4.7E+15 | ohms | |
| Volume Resistivity (25°C) | 7.1E+13 | ohms·cm | |
| Dielectric Strength | 21 | kV/mm | |
| Dielectric Constant (25°C, 1 kHz) | 4.39 | ||
| Dissipation Factor (25°C, 1 kHz) | 0.037 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (4.80 mm) | V-0 | UL 94 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 100 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Thermoset Mix Viscosity (25°C) | 8000 | cP |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Linear Shrinkage | 0.060 | % |
| Note Message | |
|---|---|
| 1 . | Hardener |
| 2 . | Resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® M TM3RST (Series: MC/RS) | KRAIBURG TPE | TPE | THERMOLAST® M |
| ALTECH® PA66 A 1000/109 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| Clariant Nylon 6 60G43-L | Clariant Corporation | Nylon 6 | Clariant Nylon 6 |
| FRIANYL® B3 H V0 | Nilit Plastics | Nylon 6 | FRIANYL® |
| O'Tech OM 5531 | O'Tech Corporation | PVC, Unspecified | O'Tech |
