Order Products : sales@su-jiao.com

Nylene® 5143 MS

Category:	Nylon 66 , Polyamide 66
Manufacturer:	Custom Resins Group
Trademark:	Nylene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	lD8XIL_Nylene-5143-MS.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Low wear 43% glass fiber reinforced nylon 6/6

Provides a low friction and low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material

Suitable for applications such as bushings and bearings, wear plates, caterpillar tracks, and other parts where wear may be an issue

General Information
Filler / Reinforcement	Glass Fiber, 43% Filler by Weight
Features	Good Wear Resistance High Stiffness High Strength Low Friction
Uses	Bearings Bushings

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.50	g/cm³	ASTM D792
Molding Shrinkage - Flow	0.20	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (23°C)	183	MPa	ASTM D638
Tensile Elongation (Break, 23°C)	6.0	%	ASTM D638
Flexural Modulus (23°C)	9650	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	80	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	238	°C	ASTM D648
Peak Melting Temperature	254	°C	ASTM D3418

Resin Grade	Manufacturer	Category	Trademark
Thanelene® TPU S80A15 PRTA010 TP305 MSP	Petropol Industry and Trade of Polymers LTDA	TPU-Polyester	Thanelene® TPU
TUFNYL® RFRO	SRF Ltd.	Nylon 66	TUFNYL®
3M™ Dyneon™ Fluoroplastic FEP 6301Z	3M Advanced Materials Division	FEP	3M™ Dyneon™ Fluoroplastic
Deco-Coat™ UV Cure 7155™	Epoxies, Etc.	Epoxy	Deco-Coat™
INEOS HDPE J50-1000-178	INEOS Olefins & Polymers USA	HDPE Copolymer	INEOS HDPE