Order Products : sales@su-jiao.com
KRATON® G1702 H
| Category: | SEPS , Styrene Ethylene Propylene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | lBAd6W_KRATON-G1702-H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton G1702 H is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 28%. It is supplied from North America in the physical form identified below.
Kraton G1702 H is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (230°C/5.0 kg) | < 1.0 | g/10 min | |
| Antioxidant Additive 1 | 0.030 to 0.20 | % | Internal Method |
| Polystyrene Content | 26 to 29 | % | Internal Method |
| Viscosity 2 | 18.0 to 22.0 | cSt | Internal Method |
| Volatile Matter | < 0.40 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 100 | ||
| Styrene/Rubber ratio | 28/72 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 41 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 2.07 | MPa | ASTM D412 |
| Tensile Elongation (Break) | < 100 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant. |
| 2 . | Kinematic Viscosity, 1.23%w (ENJ404@100C) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8658-65FU White 1357 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| ULTEM™ CRS5001 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| AKROMID® A3 GF 20 1 natural (1261) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| APEX® 94-A0098C-55 | Teknor Apex Company | PVC, Flexible | APEX® |
| Sylvin 9067-80 Grey 9469 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
