Order Products : sales@su-jiao.com

NuSil EPM-2461

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	lAXLuF_NuSil-EPM-2461.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications. Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chemical and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Static Dissipative Comments: Carbon black filled for EMI shielding applications

Message

As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.

Benefits of Silicone for Electronics:

Wide Operating Temperature Range of -115 °C to 250 °C

Low moisture absorption, < 0.4% Typical

Corrosion Resistance

High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm

Fillers can be added to provide thermal and electrical conductive properties

Low Modulus (Typically less than 5.5 MPa/800 psi)

Stable chemical and mechanical properties when exposed to high temperatures

Low Shrinkage

Available as gels, elastomers, film adhesives sheeting, and greases

General Purpose: Static Dissipative

Comments: Carbon black filled for EMI shielding applications

General Information
Additive	Carbon Black
Features	Electromagnetic Shielding (EMI) Good Corrosion Resistance Good Thermal Stability Low Moisture Absorption Low Shrinkage
Uses	Electrical/Electronic Applications

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Ionic Content
Cl	< 5	ppm
K	< 1	ppm
Na	< 6	ppm
Operating Temperature	-115 to 260	°C

Uncured Properties	Nominal Value	Unit
Color	Black
Viscosity
-- ¹	100	Pa·s
-- ²	1300	Pa·s
Curing Time (23°C)	24	hr
Pot Life	60	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	30
Tensile Strength	3.79	MPa
Tensile Elongation at Break	400	%
Tear Strength	5.25	kN/m

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
Auracell® M	Rotuba Extruders, Inc.	CA	Auracell®
FHR Polypropylene P6G4Z-097	Flint Hills Resources, LP	PP Impact Copolymer	FHR Polypropylene
POLIMAXX 2300NC	IRPC Public Company Limited	PP Impact Copolymer	POLIMAXX
POLYCHIM B 10 TB	POLYCHIM INDUSTRIES	PP Homopolymer	POLYCHIM
LEXAN™ PK2870 resin	SABIC Innovative Plastics	PC	LEXAN™