Order Products : sales@su-jiao.com
Grilamid® XE 4158 nat
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | EMS-GRIVORY |
| Trademark: | Grilamid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | l8zAwR_Grilamid-XE-4158-nat.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Grilamid® XE 4158 nat is a Polyamide 12 (Nylon 12) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or injection molding. Important attributes of Grilamid® XE 4158 nat are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 0.980 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow | 1.6 | -- | % | |
| Flow | 1.0 | -- | % | |
| Water Absorption | ISO 62 | |||
| Saturation, 23°C | 1.3 | -- | % | |
| Equilibrium, 23°C, 50% RH | 0.60 | -- | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Shore Hardness (Shore D, 15 sec) | 65 | 65 | ISO 868 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 1000 | 750 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 30.0 | 30.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 13 | 18 | % | ISO 527-2 |
| Nominal Tensile Strain at Break | > 50 | > 50 | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 60 | 40 | kJ/m² | |
| 23°C | 85 | 85 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | No Break | No Break | ||
| 23°C | No Break | No Break |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 70.0 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 45.0 | -- | °C | ISO 75-2/A |
| Maximum Use Temperature | Internal Method | |||
| Long Term | 90 to 100 | -- | °C | |
| Short Term | 150 | -- | °C |
| Additional Information | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| ISO Type | PA12-HI, GHL, 18-010 | -- | ISO 1874 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Melting Temperature 1 | 179 | -- | °C | ISO 11357-3 |
| CLTE | ISO 11359-2 | |||
| Flow | 1.7E-4 | -- | cm/cm/°C | |
| Transverse | 2.1E-4 | -- | cm/cm/°C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | -- | 1.0E+11 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+11 | 1.0E+11 | ohms·cm | IEC 60093 |
| Electric Strength | 40 | 40 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | -- | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flammability Classification (0.800 mm) | HB | -- | IEC 60695-11-10, -20 |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AIE PP 80T4F | Asia International Enterprise (Hong Kong) Limited | PP, Unspecified | AIE PP |
| Colorite CS Series CS1539GP | Colorite Polymers | PVC, Flexible | Colorite CS Series |
| Dynaglide® DW 646 | DeWAL Industries | PTFE | Dynaglide® |
| Globalprene® 3741 | Lee Chang Yung Chemical Industry Corp. | SBS | Globalprene® |
| InnoTuf® HP-2160A | Innovative Polymers, Inc. | TSU-Ether | InnoTuf® |
