Order Products : sales@su-jiao.com
SABIC® LLDPE M200024
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | l4nUlO_SABICLLDPEM200024.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Product Description M200024 is Linear Low Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give good flow properties with low temperature toughness, stress crack resistance and high gloss. Typical Applications M200024 is recommended for housewares, trash cans, lids for large industrial containers, automotive parts etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693B | ||
| 10% Igepal, injection molding, F50 | 3.00 | hr | ASTM D1693B |
| 100% Igepal, injection molding, F50 | 6.00 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant (Injection Molded) | 230 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, injection molding | 10.0 | MPa | ASTM D638 |
| Fracture, injection molding | 12.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | > 500 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 200 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 9.00 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | 500 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 92.0 | °C | ASTM D1525 1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 190 - 230 | °C | |
| Middle Temperature | 190 - 230 | °C | |
| Front Temperature | 190 - 230 | °C | |
| Mold Temperature | 15.0 - 60.0 | °C | |
| Injection Pressure | 60.0 - 100 | MPa |
| Note Message | |
|---|---|
| 1 . | 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide P1000IX1 | Eurostar Engineering Plastics | Nylon 6 | Staramide |
| apigo® E/350 | API SpA | TPO (POE) | apigo® |
| Fainplast PVC GSK 0637/AL | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| Jam PE 526F2 | Jam Petrochemical Company | HDPE | Jam PE |
| Sylvin 6034-85 Green 3196 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
