Order Products : sales@su-jiao.com
Optimum® 800 MF
| Category: | Copolyester , Copolyester |
| Manufacturer: | RAUH Polymers, Inc. |
| Trademark: | Optimum® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | l4kNDV_Optimum-800-MF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Optimum® 800 MF is a Copolyester product. It can be processed by injection molding and is available in North America. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 50 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 to 0.80 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 48.3 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 120 | % | ASTM D638 |
| Flexural Modulus | 2070 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 640 | J/m | ASTM D256 |
| Instrumented Dart Impact | 36.2 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.18 mm) | 125 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Type I |
| 2 . | Type I |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TF4STE (Series: FC/CS) | KRAIBURG TPE | TPE | THERMOLAST® K |
| ACCUCOMP™ ABS802L | ACLO Compounders Inc. | ABS | ACCUCOMP™ |
| ECP 21150 | TBA Electro Conductive Products Ltd. | TPU-Polyether | ECP |
| Kumho SSBR SOL-5220M | Korea Kumho Petrochemical Co., Ltd. | SBR, Solution | Kumho SSBR |
| LUVOCOM® 1/XCF/40 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
