Order Products : sales@su-jiao.com
Epoxies, Ect. 20-3035 (Cat.140)
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxies, Etc. |
| Trademark: | Epoxies, Ect. |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | l2SZEw_Epoxies-Ect-20-3035-Cat-140-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
20-3035 is a low density, two component epoxy potting and encapsulating system. The 20-3035 is less than half the weight of most commercially available potting compounds. 20-3035 exhibits very low shrinkage during the cure cycle and also has a low coefficient of thermal expansion. This unique epoxy system is an ideal material for the potting of electronic assemblies where a low dielectric constant and low weight are required. This epoxy syntactic foam system utilizes an advanced micro balloon technology filler. The 20-3035 provides high strength and stiffness, thermal and environmental stability, creep resistance, and water resistance. Features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Molding Shrinkage - Flow | 0.10 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Flexural Strength | 34.5 | MPa |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 4.3E-5 | cm/cm/°C | |
| Thermal Conductivity | 0.19 | W/m/K |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Mix Viscosity (25°C) | 5000 | cP |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Operating Temperature | -65.0 to 105 | °C | |
| Outgassing | |||
| % CVCM | 0.0900 | ||
| % TMLV | 0.740 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Mix Ratio by Weight (PBW) | |||
| Part A | 100 | ||
| Part B | 23 | ||
| Density (25°C) | 0.838 | g/cm³ | |
| Viscosity 1(25°C) | 45 | Pa·s | |
| Curing Time | |||
| 65°C | 1.0 to 2.0 | hr | |
| 45°C | 4.0 to 6.0 | hr | |
| 25°C | 16 to 24 | hr | |
| Pot Life 2(25°C) | 30 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Water Absorption 3 | 0.40 | % | |
| Shore Hardness (Shore D) | 78 | ||
| Tensile Strength | 29.6 | MPa | |
| Compression Strength | 68.9 | MPa | |
| Electric Strength | 15 | kV/mm | |
| Relative Permittivity (1 MHz) | 2.90 | ||
| Volume Resistivity (25°C) | > 1.0E+13 | ohms·cm | |
| Dissipation Factor (1 MHz) | 0.050 |
| Note Message | |
|---|---|
| 1 . | Part A |
| 2 . | 100 grams |
| 3 . | After 24 hours |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VESTAMID® D D16 | Evonik Industries AG | Nylon 612 | VESTAMID® D |
| Adstif HA612M | LyondellBasell Industries | PP, High Crystal | Adstif |
| Delta ABS 8540-S | Delta Polymers | ABS | Delta |
| Hifax TYC 258P G14008 | LyondellBasell Industries | PP Copolymer | Hifax |
| PLUSTEK PB826G3 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
