Order Products : sales@su-jiao.com

THERMOLAST® M TM7LFT (Series: MC/LF)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	THERMOLAST® M
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	l2780H_THERMOLAST-M-TM7LFT-Series-MC-LF-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The MC/LF Series is your material solution for applications requiring basic medical approvals such as ISO 10993-5. The series convinces due to its extremely low friction coefficient. The compounds are produced exclusively by a special medical unit and available in translucent colors.

Typical applications

Mechanical components

Seals

Syringe gaskets

Material advantages

Adhesion to PP

DMF listed

Excellent mechanical properties

For injection molding

KRAIBURG TPE Medical service package (description below)

Sterilizable (autoclave 134°C, gammaradiation 2x35 kGy, EtO)

Tested according to ISO 10993-5

General Information
Features	Autoclave Sterilizable Ethylene Oxide Sterilizable Good Adhesion Low Friction Radiation Sterilizable
Uses	Gaskets Medical/Healthcare Applications Seals
Agency Ratings	DMF 25607 ISO 10993 Part 5
Appearance	Translucent
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.890	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	68		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	12.0	MPa	ISO 37
Tensile Elongation ²(Break)	800	%	ISO 37
Tear Strength ³	21	kN/m	ISO 34-1
Compression Set ⁴			ISO 815
23°C, 72 hr	31	%
70°C, 24 hr	41	%
100°C, 24 hr	60	%

Extrusion	Nominal Value	Unit
Drying Temperature	60.0 to 80.0	°C
Drying Time	2.0 to 4.0	hr
Cylinder Zone 1 Temp.	160	°C
Cylinder Zone 2 Temp.	180	°C
Cylinder Zone 3 Temp.	200	°C
Die Temperature	200 to 230	°C

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method Bb, Angle (Nicked)
4 .	Method A

Resin Grade	Manufacturer	Category	Trademark
TRIMID® N66-1010	Polymer Technology and Services, LLC	Nylon 66	TRIMID®
DOW™ LDPE 320E	The Dow Chemical Company	LDPE	DOW™ LDPE
CERTENE™ PHM-70	Muehlstein	PP Homopolymer	CERTENE™
Epolene® N-14	Westlake Chemical Corporation	LDPE	Epolene®
SQUARE® LIM2012-70A/B	Shenzhen SQUARE Silicone Co., Ltd.	Silicone Rubber, LSR	SQUARE®