Order Products : sales@su-jiao.com
Monprene® IN-32954
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Monprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | l25OZa_Monprene-IN-32954.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Monprene® IN-32954 is a Thermoplastic Elastomer (TPE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or injection molding. Typical application of Monprene® IN-32954 : Consumer Goods |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 0.40 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 1 sec) | 55 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 5.50 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 500 | % | ASTM D412 |
| Compression Set 1 | ASTM D395B | ||
| 23°C, 22 hr | 19 | % | |
| 70°C, 22 hr | 39 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 199 to 210 | °C | |
| Middle Temperature | 204 to 216 | °C | |
| Front Temperature | 210 to 221 | °C | |
| Nozzle Temperature | 216 to 227 | °C | |
| Processing (Melt) Temp | 216 to 227 | °C | |
| Mold Temperature | 25.0 to 65.6 | °C | |
| Cushion | 3.81 to 25.4 | mm |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 193 to 204 | °C | |
| Cylinder Zone 2 Temp. | 199 to 210 | °C | |
| Cylinder Zone 3 Temp. | 204 to 216 | °C | |
| Cylinder Zone 5 Temp. | 210 to 221 | °C | |
| Die Temperature | 216 to 227 | °C |
| Note Message | |
|---|---|
| 1 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PP 49MK40 | SABIC Americas, Inc. | PP Impact Copolymer | SABIC® PP |
| Tenac™-C HC460 | Asahi Kasei Chemicals Corporation | Acetal (POM) Copolymer | Tenac™-C |
| Adell Polyamide BJ-37 Glass Reinforced High Impact | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| Ecomass® 1005ZD96 | Ecomass Technologies | Nylon Copolymer | Ecomass® |
| IDI STC 2147 | IDI Composites International | Vinyl Ester | IDI STC |
