Order Products : sales@su-jiao.com
KMI PE KM-7008ADMD
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | KMI PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kzNCZV_KMIPEKM7008ADMD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KM-7008ADMD is a high density polyethylene for injection molding Applications: Applications requiring high rigidity. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.970 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.3 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | 2.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 61 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 18.4 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 350 | % | ASTM D638 |
| Flexural Modulus | 1410 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 168 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 83.9 | °C | ASTM D648 |
| Brittleness Temperature | -76.1 | °C | ASTM D746 |
| Vicat Softening Temperature | 131 | °C | ASTM D1525 |
| Melting Temperature | 133 | °C | Internal method |
| Peak Crystallization Temperature (DSC) | 120 | °C | Internal method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DOW™ HDPE DMDA-8904 HEALTH+™ | The Dow Chemical Company | HDPE | DOW™ HDPE |
| Adell Polyamide AG-16-662 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| Elastron® TPO T100.D42.N | Elastron USA, Inc. | TPO (POE) | Elastron® TPO |
| GERMAMID 6.6 ST SCHWARZ | Kunststoff-Kontor-Hamburg GmbH | Nylon 66 | GERMAMID |
| WELLAMID Nylon 6000 GVS 20/20 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 6 | WELLAMID Nylon |
