Order Products : sales@su-jiao.com
Laprene® 83F000952
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Laprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kzE46x_Laprene-83F000952.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Laprene® 83F000952 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Europe, Latin America, or North America for injection molding. Primary attribute of Laprene® 83F000952: REACH Compliant. Typical application of Laprene® 83F000952: Appliances |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 43 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | 4 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 0.900 | MPa | ASTM D412 |
| Tensile Strength 2 | 11.8 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 820 | % | ASTM D412 |
| Tear Strength 4 | 24.0 | kN/m | ASTM D624 |
| Compression Set 5(70°C, 22 hr) | 39 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 | °C | |
| Middle Temperature | 180 | °C | |
| Front Temperature | 180 | °C | |
| Nozzle Temperature | 190 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| 4 . | Die C |
| 5 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROPRENE® 1 A70 E1N | Taro Plast S.p.A. | TPV | TAROPRENE® |
| TEREZ PA/PP 7200/1 | TER HELL PLASTIC GMBH | Nylon 6+PP | TEREZ PA/PP |
| Valtra® MC3500 | Saudi Polymers Company | PS (GPPS) | Valtra® |
| COTENE™ M1108 DIP | ICO Polymers EMEA, A Division of A. Schulman | Polyolefin, Unspecified | COTENE™ |
| Elastollan® LP 9286 | BASF Polyurethanes GmbH | TPU-Polyether | Elastollan® |
