Versaflex™ OM 6258-9 Datasheet,TPE,PolyOne Corporation-SHANGHAI SUSHENG

Message
Versaflex™OM 6258-9 is specially designed to bond a variety of standard and modified nylon materials, including those that have undergone glass filling, thermal stabilization and/or impact improvement. New Products. Commercial norms have not yet been established. Very strong coloring ability Excellent adhesion during secondary or insert injection molding Soft, similar to rubber when held in hand very easy to process

General Information
Features	Workability, good Good coloring Good adhesion
Uses	Handle overmolding Lawn and Garden Equipment Electrical/Electronic Applications Power/other tools Soft handle Consumer goods application field
Agency Ratings	UL 94 HB.QMFZ2.E76261
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.09	g/cm³	ASTM D792
Molding Shrinkage - Flow	1.4 - 2.0	%	ASTM D955

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (10 sec)	62		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
100% strain, 23°C ²	1.90	MPa	ASTM D412
300% strain, 23°C ³	2.65	MPa	ASTM D412
Tensile Strength (Break, 23°C)	2.76	MPa	ASTM D412
Tensile Elongation (Break, 23°C)	350	%	ASTM D412
Tear Strength	18.6	kN/m	ASTM D624
Compression Set (23°C, 22 hr)	23	%	ASTM D395B

Flammability	Nominal Value		Test Method
Flame Rating (1.50 mm)	HB		UL 94

Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity (200°C, 11200 sec^-1)	31.6	Pa·s	ASTM D3835

Injection	Nominal Value	Unit
Suggested Max Regrind	20	%
Rear Temperature	182 - 204	°C
Middle Temperature	243 - 266	°C
Front Temperature	249 - 271	°C
Nozzle Temperature	254 - 277	°C
Processing (Melt) Temp	249 - 271	°C
Mold Temperature	12.8 - 29.4	°C
Back Pressure	0.00 - 0.552	MPa
Screw Speed	80 - 120	rpm

Injection instructions
在使用此产品之前或之后，均须用熔体流动速率较低 (0.5 - 2.5 MFR) 的聚乙烯 (PE) 或聚丙烯 (PP) 彻底进行置换。Versaflex™ OM 6258-9 可利用高达 20% 的回收料同时其性能所受影响却极小，但该回收料必须是未受到污染的。为了最大限度地减小模塑期间其性能所受的影响，熔体温度应维持得尽可能低。回收料的有效性应由用户最终确定。Versaflex™ OM 6258-9 具有良好的熔体稳定性。最长停留时间可能会根据机筒尺寸有所变化。通常，如果机器闲置 8 - 10 分钟或以上，则应将机筒排空。不需要干燥注射速度：3 - 6 英寸/秒第一阶段 - 提升压力：300 - 800 psi第二阶段 - 保持压力：0% 的升压保持时间（厚部件）：0 - 4 秒保持时间（薄部件）：0 - 3 秒

Injection instructions

在使用此产品之前或之后，均须用熔体流动速率较低 (0.5 - 2.5 MFR) 的聚乙烯 (PE) 或聚丙烯 (PP) 彻底进行置换。Versaflex™ OM 6258-9 可利用高达 20% 的回收料同时其性能所受影响却极小，但该回收料必须是未受到污染的。为了最大限度地减小模塑期间其性能所受的影响，熔体温度应维持得尽可能低。回收料的有效性应由用户最终确定。Versaflex™ OM 6258-9 具有良好的熔体稳定性。最长停留时间可能会根据机筒尺寸有所变化。通常，如果机器闲置 8 - 10 分钟或以上，则应将机筒排空。不需要干燥注射速度：3 - 6 英寸/秒第一阶段 - 提升压力：300 - 800 psi第二阶段 - 保持压力：0% 的升压保持时间（厚部件）：0 - 4 秒保持时间（薄部件）：0 - 3 秒

Note Message
1 .	2 hours
2 .	Mouth die c
3 .	C mould

Resin Grade	Manufacturer	Category	Trademark
Sanren F800EPS (On-spec.)	SINOPEC Shanghai Petrochemical Co. Ltd.	PP Random Copolymer	Sanren
TRANSMARE® 19HGF40-1.003	Transmare Compounding B.V.	PP Homopolymer	TRANSMARE®
Geon™ Vinyl Rigid Extrusion 87554	PolyOne Corporation	PVC, Rigid	Geon™ Vinyl Rigid Extrusion
Sylvin 9915-95 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
LNP™ THERMOCOMP™ RFZ349XC compound	SABIC Innovative Plastics	Nylon 66	LNP™ THERMOCOMP™

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	PolyOne Corporation
Trademark:	Versaflex™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	kv3VFN_Versaflex-OM-6258-9.pdf
PRICE:	Order Products email sales@su-jiao.com