Order Products : sales@su-jiao.com
Horda E8400
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | Horda Cable Compounds |
| Trademark: | Horda |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ksgKZW_HordaE8400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Easy Strippable Semiconductive Shielding E8400 is a crosslinkable, easy-strippable semiconductive compound, designed for both XLPE and EPDM rubber insulated cables and use in both dry and steam curing processes. Specifications: E8400 meets the requirements as below, when optimal processing extrusion and end testing procedure are used: AEIC-CS 5/94 BS 6622 HN 33-S-23 (EDF) IEC 502 IEC 840 NF CS 32/321 SS 424 14 16, SS424 14 17 (HD 620 S1:1996) VDE 0273 / 12.87 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | ASTM D1928 |
| Moisture Content 1 | ppm | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset 2(200°C) | 15 - 25 | % | IEC 60540 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 - 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 13.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 250 | % | ASTM D638 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (135°C, 168 hr) | -5.0 | % | ASTM D638 |
| Change in Ultimate Elongation in Air (135°C, 168 hr) | -40 | % | ASTM D638 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | ASTM D257 | ||
| 23°C | < 5.0E+2 | ohms·cm | ASTM D257 |
| 90°C | < 1.0E+3 | ohms·cm | ASTM D257 |
| 120°C | < 1.0E+3 | ohms·cm | ASTM D257 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | < 40 | °C | |
| Cylinder Zone 1 Temp. | 60 - 110 | °C | |
| Cylinder Zone 2 Temp. | 60 - 110 | °C | |
| Cylinder Zone 3 Temp. | 60 - 110 | °C | |
| Cylinder Zone 4 Temp. | 60 - 110 | °C | |
| Cylinder Zone 5 Temp. | 60 - 110 | °C | |
| Die Temperature | 100 - 130 | °C |
| Extrusion instructions |
|---|
| Screw cooling: 40 to 50 °C |
| Note Message | |
|---|---|
| 1 . | QAHC-10420 (Karl Fischer method) |
| 2 . | 20 N/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIBOCOMP® PA612 GF30 TS0 | EPIC Polymers | Nylon 612 | TRIBOCOMP® |
| Ultramid® A3X2G10 | BASF Corporation | Nylon 66 | Ultramid® |
| Globalene® PF3006 | Lee Chang Yung Chemical Industry Corp. | PP Alloy | Globalene® |
| Moplen HP6060 | HMC Polymers | PP Homopolymer | Moplen |
| ALTECH® PC ECO 2030/500 GF30 | ALBIS PLASTIC GmbH | PC | ALTECH® PC |
