Order Products : sales@su-jiao.com
SABIC® PPcompound 3010UE
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® PPcompound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kp0HiZ_SABICPPcompound3010UE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® PPcompound 3010UE is a development grade, elastomer-modified mineral filled Polypropylene for automotive exterior applications. This material has been designed to combine high flow and high modulus in combination with good surface esthetics and emission, and makes this grade suitable for exterior applications, like cowl top panels. SABIC® PPcompound 3010UE is a designated automotive grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 30 | g/10 min | ISO 1133 |
| Molding Shrinkage (24 hours, 3.20mm) | 1.1 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2000 | MPa | ISO 527-2/1A |
| Tensile Stress | ISO 527-2/1A | ||
| Yield, injection molding | 28.0 | MPa | ISO 527-2/1A |
| Fracture, injection molding | 21.0 | MPa | ISO 527-2/1A |
| Tensile Strain (Break, Injection Molded) | 15 | % | ISO 527-2/1A |
| Flexural Modulus (Injection Molded) | 2100 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 5.0 | kJ/m² | ISO 180/1A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4000.3 | RTP Company | PPA | RTP |
| SABIC® STAMAX 60YK270E | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® STAMAX |
| Wondel® A AR0G5 | Nanjing Julong Engineering Plastics Co., LTD | Nylon 66 | Wondel® A |
| Abstron AP 78 EP | Bhansali Engineering Polymers Limited | ABS | Abstron |
| Electrafil® PA12 CB | Techmer Engineered Solutions | Nylon 12 | Electrafil® |
