Order Products : sales@su-jiao.com
Bayflex® 956
| Category: | PUR-MDI , Polyurethane (MDI) |
| Manufacturer: | Covestro - PUR |
| Trademark: | Bayflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ko4Pao_Bayflex-956.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Bayflex 956 is a fully compounded polyether-based polyurethane system consisting of two liquid components which can be water-blown. Component A is a modified diphenylmethane diisocyanate (MDI) prepolymer, and Component B is a polyether polyol system. The Bayflex 956 system is used in the manufacture of microcellular polyurethane shoe soles. Soles prepared from these components combine light weight, comfort, and durability. Processibility and dynamic flexural properties are excellent over a wide range of densities. The combination of excellent physical properties and ease of processing has made the Bayflex 956 system a prime soling material for fashion and casual shoes. As with any product, use of the Bayflex 956 system in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.481 - 0.545 | g/cm³ | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 51 - 58 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 30.0 - 70.0 | mg | ASTM D3489 |
| Ross Flex 1 | ASTM D1052 | ||
| -29°C, 6.35 mm | > 5.0E+4 | Cycles | ASTM D1052 |
| -18°C, 6.35 mm | > 1.0E+5 | Cycles | ASTM D1052 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 3.45 - 4.14 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 350 - 450 | % | ASTM D412 |
| Tear Strength | |||
| -- 2 | 3.33 - 4.38 | kN/m | Internal method |
| -- 3 | 15.8 - 19.3 | kN/m | ASTM D624 |
| Thermoset | Nominal Value | ||
|---|---|---|---|
| Thermoset Components 4 | |||
| Component a | Mixing ratio by weight: 78 | ||
| Component B | Mixing ratio by weight: 100 |
| Additional Information |
|---|
| Part A Type: Isocyanate Specific Gravity @ 25°C: 1.20 Viscosity @25°C: 1100 mPa*s Flash Point PMCC: 207°C NCO: 18.7 - 19.1 wt% Part B Type: Polyol Specific Gravity @ 25°C: 1.06 Viscosity @25°C: 1000 to 1500 mPa*s Flash Point PMCC: 126°C Water: 0.38 to 0.44 wt% Hydroxyl Number: 170 to 180 mg KOH/g Material Temperature: 28 to 32°CMold Temperature: 43 to 51°CDemold Time: 3.5 minLinear Shrinkage @.5 g/cm³: <1.0%Hand Mix Reactivity @ 28°C Cream Time: 9 to 13 sec Tack Free: 10 to 25 sec Pull Time: 25 to 35 sec Free-Rise Density: 15 to 18 lb/ft³ |
| Note Message | |
|---|---|
| 1 . | 0% Cut Growth |
| 2 . | Split |
| 3 . | C mould |
| 4 . | 98 Index |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 600 GB 40 | RTP Company | ABS | RTP |
| Veroplas PA2001F | PlastxWorld Inc. | Nylon 6 | Veroplas |
| CALP E4331 | Lion Idemitsu Composites Co., Ltd. | Polyolefin, Unspecified | CALP |
| DOMAMID® 6G30GT96M | DOMO Engineering Plastics SPA | Nylon 6 | DOMAMID® |
| Kemcor LD 5270 | Qenos Pty Ltd | LDPE | Kemcor |
