Order Products : sales@su-jiao.com
Alathon® M6580WC
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Alathon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kkORGz_Alathon-M6580WC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ALATHON M 6580WC is a natural, high density, polyethylene homopolymer resin with a narrow molecular weight distribution formulated for use as primary insulation for coaxial and control cable applications including gas-injected or chemically expanded insulation. M 6580WC provides enhanced processability and stiffness, exhibits excellent color, low odor and good processing stability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.965 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.2 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 68 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 28.3 | MPa | ASTM D638 |
| Fracture | 22.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1700 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 1670 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 130 | °C | ASTM D1525 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 3.0E+17 | ohms·cm | ASTM D257 |
| Dielectric Strength | 28 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 2.36 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 1 MHz | 3.0E-5 | ASTM D150 | |
| 2.00 GHz | 2.0E-5 | ASTM D150 |
| Additional Information |
|---|
| The value listed as Dielectric Constant, ASTM D150, was tested in accordance with ASTM D1531.The values listed as Dissipation Factor, ASTM D150, was tested in accordance with ASTM D1531. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 149 - 163 | °C | |
| Cylinder Zone 2 Temp. | 177 - 204 | °C | |
| Cylinder Zone 3 Temp. | 204 - 232 | °C | |
| Cylinder Zone 4 Temp. | 246 - 260 | °C | |
| Adapter Temperature | 246 - 260 | °C | |
| Melt Temperature | 246 - 260 | °C | |
| Die Temperature | 246 - 260 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Teflon® PTFE 613A X | DuPont Fluoropolymers | PTFE | Teflon® PTFE |
| Vistalon™ 8800 | ExxonMobil Chemical | EPDM | Vistalon™ |
| Hanwha Total PP SH52C | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| Huafon T31 | Huafon Group Co., Ltd. | Nylon 66 | Huafon |
| Pearlthane® 11T85 | Lubrizol Advanced Materials, Inc. | TPU-Capro | Pearlthane® |
