Order Products : sales@su-jiao.com
KOPA® KN333G20BL
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Kolon Plastics, Inc. |
| Trademark: | KOPA® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | khHntl_KOPA-KN333G20BL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KOPA® KN333G20BL is a Polyamide 66 (Nylon 66) product filled with 20% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.50 to 0.80 | % | ASTM D955 |
| Water Absorption (Equilibrium, 23°C, 60% RH) | 0.40 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 140 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 6.5 | % | ASTM D638 |
| Flexural Modulus (23°C) | 6820 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 220 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 49 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648A | ||
| 0.45 MPa, Unannealed | 245 | °C | |
| 1.8 MPa, Unannealed | 240 | °C | |
| Peak Melting Temperature | 255 | °C | ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 21 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 3.60 | ASTM D150 | |
| Arc Resistance | 135 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® Seal-Fit | BASF Corporation | Nylon 66/6 | Ultramid® |
| DINALON® B1S25 MI | Grupo Repol | Nylon 6 | DINALON® |
| ELASTOSIL® RT 625 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® RT |
| OmniPro™ HPP GRC10 | OMNI Plastics, LLC | PP Homopolymer | OmniPro™ |
| FRIANYL® XT4 GF30 VOI | Nilit Plastics | PPA | FRIANYL® |
