Order Products : sales@su-jiao.com
MAJORIS CETAL DN010
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kgGX0i_MAJORIS-CETAL-DN010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
CETAL DN010 is a polyoxymethylen (POM), intended for injection moulding. APPLICATIONS The product is available in both natural but other colours can be provided on request. CETAL DN010 has been developed especially for the automotive applications and electrical components. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.41 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 10 | g/10 min | ISO 1133 |
| Water Absorption | ISO 62 | ||
| Saturated, 23°C | 0.65 | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 0.20 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2800 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2/1A/50 | ||
| Yield | 9.0 | % | ISO 527-2/1A/50 |
| Fracture | 32 | % | ISO 527-2/1A/50 |
| Flexural Modulus | 2700 | MPa | ISO 178 |
| Flexural Stress 1 | 67.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | 5.5 | kJ/m² | ISO 179 |
| 23°C | 5.5 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 104 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 151 | °C | ISO 306/B |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 35 | kV/mm | IEC 60243-1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 190 - 210 | °C | |
| Mold Temperature | 80.0 - 110 | °C | |
| Injection Pressure | 60.0 - 200 | MPa | |
| Back Pressure | 0.00 - 2.00 | MPa |
| Injection instructions |
|---|
| Holding pressure: egal injection pressure |
| Note Message | |
|---|---|
| 1 . | at Break |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVALEN® PC 19 GF 20 | Plastcom | PP, Unspecified | SLOVALEN® |
| DOW™ LDPE 303E | The Dow Chemical Company | LDPE | DOW™ LDPE |
| Fiberfil® PP-61/TC/20 | Fiberfil® Engineered Plastics Inc. | PP Copolymer | Fiberfil® |
| OTECH ALLOY OL8540 - Profile | OTECH Corporation | TP, Unspecified | OTECH ALLOY |
| POLYFLAM® RABS 90000 UV5 | A. Schulman Europe | ABS | POLYFLAM® |
