Order Products : sales@su-jiao.com
CERTENE™ HHP-0449
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kg9Zwv_CERTENE-HHP-0449.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HHP-0449 is a certified prime grade Medium Molecular Weight designed for EXTRUSION of PIPE sized up to diameter 10 in (250 mm). HHP-0449 features easy processability, good Impact strength and toughness, good Rigidity, and high ESCR. HHP-0449 recommended applications include corrugated cable duct, protective conduit, cable and telecommunications conduit, and other tubing NON pressure applications. HHP-0449 processing temperature is 355° to 380°F (180° to 195°C). HHP-0449 complies with FDA regulation 21CFR 177.520 (c) 3.2a and most international regulations concerning the Polyethylene use in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.40 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 1.75 mm, 100% Igepal, Compression Molded, F50) | > 1000 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Compression Molded) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | 850 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Compression Molded) | 1140 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Compression Molded) | 80 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 72.0 | °C | ASTM D648 |
| Brittleness Temperature | < -100 | °C | ASTM D746 |
| Vicat Softening Temperature | 124 | °C | ASTM D1525 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Unit classification | 326420A | ASTM D3350 | |
| Test specimens from compression molded plaque according to ASTM D 1928 Procedure C. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 - 195 | °C |
| Note Message | |
|---|---|
| 1 . | Notched Bent Strip |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ACCUTECH™ HP0339G20M10CL | ACLO Compounders Inc. | PP Homopolymer | ACCUTECH™ |
| Dutral® OCP 2530 PL | Versalis S.p.A. | EPDM | Dutral® |
| Hanwha Total PP FH44 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| Paracril® AJLT | INSA | NBR | Paracril® |
| Polifor® C 20 TR/30 UV NATURALE | SO.F.TER. SPA | PP Copolymer | Polifor® |
