Order Products : sales@su-jiao.com
Comco PA 6 G PE
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Comco-Plastic GmbH |
| Trademark: | Comco |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kg1mnl_Comco-PA-6-G-PE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Comco PA 6 G PE is a Polyamide 6 (Nylon 6) material. It is available in Europe. Primary attribute of Comco PA 6 G PE: Flame Rated. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.14 | -- | g/cm³ | ISO 1183 |
| Water Absorption | ||||
| Saturation, 23°C | 5.5 | -- | % | |
| Equilibrium, 23°C, 50% RH | 1.8 | -- | % |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Shore Hardness (Shore D) | 81 | -- | ISO 868 | |
| Ball Indentation Hardness | 150 | -- | MPa | ISO 2039-1 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 3400 | 1700 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 70.0 | -- | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 35 | -- | % | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 5.0 | -- | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | No Break | -- | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 80.0 | -- | °C | ISO 75-2/A |
| Melting Temperature | 220 | -- | °C | |
| CLTE - Flow | ||||
| 23 to 60°C | 8.0E-5 | -- | cm/cm/°C | |
| 23 to 100°C | 9.0E-5 | -- | cm/cm/°C | |
| Thermal Conductivity | 0.23 | -- | W/m/K | |
| Maximum Service Temperature | ||||
| in air continuosly | 110 | -- | °C | |
| in air for short periods | 170 | -- | °C | |
| Service Temperature - Minimum | -40 | -- | °C |
| Flammability | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 3.00 mm | HB | -- | ||
| 6.00 mm | HB | -- |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Styrolution PS ESCRimo | INEOS Styrolution Group GmbH | PS (HIPS) | Styrolution PS |
| Adell PP EP-34 | Adell Plastics, Inc. | PP, Unspecified | Adell PP |
| CERTENE™ PHB-07 | Muehlstein | PP, HMS | CERTENE™ |
| Desmoderm® KB2W | Covestro - PUR | PUR-Ester | Desmoderm® |
| Keysor PVC KC1500 | Keysor-Century Corporation | PVC, Unspecified | Keysor PVC |
