Order Products : sales@su-jiao.com
4POM® 23I15200
| Category: | Acetal (POM) Homopolymer , Acetal (POM) Homopolymer |
| Manufacturer: | 4Plas |
| Trademark: | 4POM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | kfwKoS_4POM-23I15200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 4POM 23I15200 is a MFI 9 Silicone Lubricated POM |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.41 | g/cm³ | ISO 1183 |
| Water Absorption 1(Equilibrium, 23°C, 50% RH) | 0.20 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2900 | MPa | ISO 527-2/5 |
| Tensile Stress (Break, 23°C) | 66.0 | MPa | ISO 527-2/5 |
| Tensile Strain (Break, 23°C) | 25 | % | ISO 527-2/5 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 7.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 156 | °C | ISO 75-2/B |
| Melting Temperature 2 | 166 | °C | ISO 11357 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 - 120 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 180 - 220 | °C | |
| Mold Temperature | 60.0 - 100 | °C | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 80.0 - 100 | MPa | |
| Screw Speed | 300 | rpm |
| Injection instructions |
|---|
| Feed Throat Temperature: 30 - 50 °CBack Pressure: Low |
| Note Message | |
|---|---|
| 1 . | 24 Hrs |
| 2 . | 10 K/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBESTA P3014 U | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| ACCUTECH™ HP0339T20L1 | ACLO Compounders Inc. | PP Homopolymer | ACCUTECH™ |
| Bynel® 39E660 | DuPont Packaging & Industrial Polymers | EVA | Bynel® |
| ARMAMID® PA 6-4E | Poly Plastic | Nylon 6 | ARMAMID® |
| Isoplast® 101 ETPU | Lubrizol Advanced Materials, Inc. | ETPU | Isoplast® |
